CN +86-0379 60208535
Close
CRUSHING EQUIPMENT
Location: Home - PRODUCTS - CRUSHING EQUIPMENT
Hammer Crusher
Hammer Crusher

Hammer Crusher

Product use:
Hammer crusher is a crushing crusher that directly breaks the material with a larger particle size of 600-1800 mm to 25 or below 25 mm. Hammer crusher structure: Hammer crusher box, rotor, hammer head, counterattack lining plate, sieve plate, etc
Details

Hammer crusher is a crushing crusher that directly breaks the material with a larger particle size of 600-1800 mm to 25 or below 25 mm.

微信图片_20180809163803_副本.jpg

Hammer crusher structure:       

Hammer crusher box, rotor, hammer head, counterattack lining plate, sieve plate and so on

锤式破碎机结构

Characteristics of hammer crusher:      

      (1) Working hammer, casting with new technology, with wear resistance, impact resistance.
       (2) According to customer requirements, adjust the required granularity.
       (3) Hammer to break the sealing of the body structure, and solve the dust pollution and ash leakage of the body in the crushing workshop.
       (4) The overall design is beautiful, compact structure, less wearing parts, easy maintenance and other advantages, is the upgrading of products.

锤式破碎机特点

Hammer crusher main uses:       

Hammer crusher is used for crushing all kinds of medium hard and weak abrasive materials. The compressive strength of the material is not more than 100MPa, and the water content is less than 15%. Crushed materials are coal, salt, chalk, gypsum, brick, limestone and so on. Also used for broken fiber structure, elastic and toughness of wood, paper or broken asbestos cement waste to recover asbestos fiber and so on. In addition, hammer crusher can not only be used in crushing production line, sand production line, but also can replace cone crusher in mineral processing production line. Hammer crusher main working parts with a hammer (also known as hammer head) of the rotor. The rotor consists of a spindle, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feeding port and crushed by the blow, impact, shear and grinding of the high-speed hammer. In the lower part of the rotor, is provided with a sieve plate, the particle size of the crushed material is less than the sieve size discharged through the sieve plate, the coarse particle size is greater than the sieve size resistance to stay on the sieve plate to continue to be hit and grinding by a hammer, and then discharged through the sieve plate.

锤式破碎机


H
ammer crusher specifications and performance parameters:


Ring hammer crusher technical parameters:




Hammer crusher is a crushing crusher that directly breaks the material with a larger particle size of 600-1800 mm to 25 or below 25 mm.

微信图片_20180809163803_副本.jpg

Hammer crusher structure:       

Hammer crusher box, rotor, hammer head, counterattack lining plate, sieve plate and so on

锤式破碎机结构

Characteristics of hammer crusher:      

      (1) Working hammer, casting with new technology, with wear resistance, impact resistance.
       (2) According to customer requirements, adjust the required granularity.
       (3) Hammer to break the sealing of the body structure, and solve the dust pollution and ash leakage of the body in the crushing workshop.
       (4) The overall design is beautiful, compact structure, less wearing parts, easy maintenance and other advantages, is the upgrading of products.

锤式破碎机特点

Hammer crusher main uses:       

Hammer crusher is used for crushing all kinds of medium hard and weak abrasive materials. The compressive strength of the material is not more than 100MPa, and the water content is less than 15%. Crushed materials are coal, salt, chalk, gypsum, brick, limestone and so on. Also used for broken fiber structure, elastic and toughness of wood, paper or broken asbestos cement waste to recover asbestos fiber and so on. In addition, hammer crusher can not only be used in crushing production line, sand production line, but also can replace cone crusher in mineral processing production line. Hammer crusher main working parts with a hammer (also known as hammer head) of the rotor. The rotor consists of a spindle, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feeding port and crushed by the blow, impact, shear and grinding of the high-speed hammer. In the lower part of the rotor, is provided with a sieve plate, the particle size of the crushed material is less than the sieve size discharged through the sieve plate, the coarse particle size is greater than the sieve size resistance to stay on the sieve plate to continue to be hit and grinding by a hammer, and then discharged through the sieve plate.

锤式破碎机


H
ammer crusher specifications and performance parameters:


Ring hammer crusher technical parameters:




0.240442s