CN +86-0379 60208535
Close
GRINDING EQUIPMENT
Location: Home - PRODUCTS - GRINDING EQUIPMENT
Raymond mill
Raymond mill

Raymond mill

Product use:
【Specification Model】: 3R-6R [Production capacity]: 0.5-15T/H [Application range]: Suitable for barite, calcite, potash feldspar, talc, olivine, limestone, dolomite, fluorite, lime, colored clay, bentonite, kaolin, bentonite, kaolin, phosphogarnet, cement, Cement, glass, manganese ore, titanium ore, copper ore, chrome ore, refractory materials, microbial materials, coal char, coal powder, carbon black, titanium ore, bone powder, iron oxide, clay, etc.
Details
  • Product Introduction


 

Raymond mill is widely used in calcite, potassium feldspar, talc, barite, marble, limestone, dolomite, fluorite, calcium stone, lime, fly ash, titanium dioxide, talcum powder, activated clay, activated carbon, carbon black, bauxite, bentonite, kaolin, cement, shell, power plant desulfurization, ore, bluestone, phosphate rock, gypsum, glass, thermal insulation materials such as mohs hardness is not more than Grade 9.3, high fine powder processing of more than 280 kinds of materials in non-flammable and explosive mineral, chemical, construction and other industries with humidity below 10%, r-type Raymond mill finished particle size can be adjusted freely within the range of 80-325 mesh, some materials can reach 800 mesh.


composition structure


 

he whole structure of Raymond mill is composed of main machine, analysis machine, pipe device, blower, cyclone separator, jaw crusher, dustbowl hoist, electromagnetic vibration feeder, electric motor and so on. The main machine of Raymond mill consists of a frame, an air inlet volute, a shovel, a grinding roller, a grinding ring, a cover and a motor.

 

  • working principle


 

Work, will need to crush materials from hood shell side into the hopper add machine, relying on roller device of hanging on the host plum flower shelf, around the vertical axis of revolution, itself rotates at the same time, due to the effect of rotating centrifugal force when the roller swing outward, press in ring, the shovel knife scooping up material to between grinding roller and grinding ring, The purpose of crushing materials is achieved by rolling and pressing the grinding roller.

 

  • Features


 

1. Strong system, high screening rate, the machine is three-dimensional structure, small occupation area, strong system, from raw material rough processing to transport to powder and packaging, can become an independent production system. The fineness of finished powder is even, and the screening rate is as high as 99%.
2. Smooth transmission, high wear resistance, the machine adopts closed gear box and pulley transmission device, smooth transmission, reliable operation. The core components are made of high performance wear-resistant materials with high wear-resisting performance and cost saving.
3. Easy to control, easy to maintain the centralized control of the electrical system, the workshop can basically realize unmanned operation. The e electromagnetic vibration feeder feeding, continuous and uniform, easy to adjust, energy saving, convenient maintenance.

 

  • Products Exhibition



  • Technical Specification

 


 

18.06.jpg





  • Product Introduction


 

Raymond mill is widely used in calcite, potassium feldspar, talc, barite, marble, limestone, dolomite, fluorite, calcium stone, lime, fly ash, titanium dioxide, talcum powder, activated clay, activated carbon, carbon black, bauxite, bentonite, kaolin, cement, shell, power plant desulfurization, ore, bluestone, phosphate rock, gypsum, glass, thermal insulation materials such as mohs hardness is not more than Grade 9.3, high fine powder processing of more than 280 kinds of materials in non-flammable and explosive mineral, chemical, construction and other industries with humidity below 10%, r-type Raymond mill finished particle size can be adjusted freely within the range of 80-325 mesh, some materials can reach 800 mesh.


composition structure


 

he whole structure of Raymond mill is composed of main machine, analysis machine, pipe device, blower, cyclone separator, jaw crusher, dustbowl hoist, electromagnetic vibration feeder, electric motor and so on. The main machine of Raymond mill consists of a frame, an air inlet volute, a shovel, a grinding roller, a grinding ring, a cover and a motor.

 

  • working principle


 

Work, will need to crush materials from hood shell side into the hopper add machine, relying on roller device of hanging on the host plum flower shelf, around the vertical axis of revolution, itself rotates at the same time, due to the effect of rotating centrifugal force when the roller swing outward, press in ring, the shovel knife scooping up material to between grinding roller and grinding ring, The purpose of crushing materials is achieved by rolling and pressing the grinding roller.

 

  • Features


 

1. Strong system, high screening rate, the machine is three-dimensional structure, small occupation area, strong system, from raw material rough processing to transport to powder and packaging, can become an independent production system. The fineness of finished powder is even, and the screening rate is as high as 99%.
2. Smooth transmission, high wear resistance, the machine adopts closed gear box and pulley transmission device, smooth transmission, reliable operation. The core components are made of high performance wear-resistant materials with high wear-resisting performance and cost saving.
3. Easy to control, easy to maintain the centralized control of the electrical system, the workshop can basically realize unmanned operation. The e electromagnetic vibration feeder feeding, continuous and uniform, easy to adjust, energy saving, convenient maintenance.

 

  • Products Exhibition



  • Technical Specification

 


 

18.06.jpg





0.103534s